{"product_id":"bostik-tarbicol-ms-elastik-parketiliim","title":"BOSTIK TARBICOL MS ELASTIK parquet adhesive 21kg","description":"\u003ch2 class=\"new-product-title\"\u003eONE-COMPONENT ADHESIVE BASED ON MS-POLYMERS FOR PARQUET INSTALLATION ON ALL TYPES OF SUBSTRATES\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eAREA OF USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e The adhesive, based on a single-component MS polymer, is used for laying untreated or varnished parquet, parquet boards of all types and sizes up to 23 mm thick. Parquets for which to use:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e piece parquet of any width and length;\u003c\/li\u003e\n\n\u003cli\u003e varnished or untreated parquet;\u003c\/li\u003e\n\n\u003cli\u003e assembled parquet;\u003c\/li\u003e\n\n\u003cli\u003e parquet installed on ribs;\u003c\/li\u003e\n\n\u003cli\u003e high density parquet;\u003c\/li\u003e\n\n\u003cli\u003e all types of wood, including white beech, birch, bamboo;\u003c\/li\u003e\n\n\u003cli\u003e array up to 170 mm wide.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e For installing parquet on various types of absorbent or non-absorbent substrates: concrete, wood, metal, tiles, anhydrite screed.\u003c\/p\u003e\n\u003cp\u003e Ideal for exotic wood species. \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" class=\"tableID-12 tableSaved\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd colspan=\"2\"\u003e\n\n\u003cp\u003e \u003cstrong\u003eTECHNICAL FEATURES\u003c\/strong\u003e \u003cstrong\u003e(1)\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Base\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e MS polymer\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Appearance\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e liquid glue paste\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Density\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e 1.60 ±0.02 g\/cm3\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Open time\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e approx. 40 min at +20 °C\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Color\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e light brown\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Final adhesion\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e After 24–48 hours\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Commissioning\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Walking load – approximately 24 hours and intensive exercise – approximately 48 hours\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Ready for scraping and grinding\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e at least 48–72 hours later\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Operating temperature\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e +10 °С…+30 °С\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e Cost\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e 700–1000 g\/m2\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e \u003cem\u003e(1)\u003c\/em\u003e \u003cem\u003eTechnical characteristics are given at normal temperature and relative humidity, for substrates of normal absorbency, using the recommended tool.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eINSTRUCTIONS FOR USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e TYPE OF SUBSTRATE FOR INSTALLATION: prepared concrete surfaces, cement-based screeds; chipboard and plywood.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePREPARING THE BASE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e The base must be firm and level, hard, clean, dry, free of dust and grease.\u003c\/p\u003e\n\u003cp\u003e The surface humidity during the installation of the coating must not exceed 4%. If the humidity is above 4%, use the EPONAL 376 system.\u003c\/p\u003e\n\u003cp\u003e Concrete slabs or cement screed must be prepared with ROXOL leveling compound.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Tarbicol MS Elastic is applied to the surface of the substrate with a notched trowel B12 at a rate of 700–1000 g\/m2. There is no setting time(2).\u003c\/p\u003e\n\u003cp\u003e The gaps between the wall and the parquet strips must be at least 8 mm. This gap is then covered with a skirting board. Rule for calculating gaps: 0.15% of each largest dimension of the surface to be covered with parquet.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003e(2)\u003c\/em\u003e \u003cem\u003eGumming time – time for initial film formation (solvent evaporation).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e To achieve optimal results from the material, it is recommended to use material from the same batch for each individual object. Due to the production technology, there are small but permissible differences in the technical data of different batches.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Parquet should be stored in a dry room in a closed package.\u003c\/li\u003e\n\n\u003cli\u003e Do not use glue when the humidity is above 65%.\u003c\/li\u003e\n\n\u003cli\u003e Lay the parquet at the installation site at least 48 hours before starting work to balance the humidity.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cul\u003e\n\n\u003cli\u003e For heated floors: the heating must be turned on at least 3 weeks before laying the parquet and turned off at least 48 hours before laying. The heating temperature must be increased gradually, only a week after laying.\u003c\/li\u003e\n\n\u003cli\u003e Tarbicol MS Elastic adhesive has high adhesion.\u003c\/li\u003e\n\n\u003cli\u003e Tools are cleaned of fresh glue with acetone.\u003c\/li\u003e\n\n\u003cli\u003e Strictly follow the parquet manufacturer's recommendations.\u003c\/li\u003e\n\n\u003cli\u003e After completing the work, the adhesive package must be tightly closed.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eSTORAGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e 1 year in closed factory packaging at temperatures from +5 °С to +30 °С. Withstands freezing down to –10 °С.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Plastic bucket 21 kg.\u003c\/p\u003e","brand":"CHEMIX","offers":[{"title":" 21 kg \/ Beige","offer_id":53154342732099,"sku":"","price":280.0,"currency_code":"EUR","in_stock":true},{"title":"7kg \/ Beige","offer_id":53554432966979,"sku":null,"price":110.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/5576\/6083\/files\/0089262_parketiliim-bostik-tarbicol-ms-elastik-21kg.jpg?v=1747485515","url":"https:\/\/chemix.fi\/en\/products\/bostik-tarbicol-ms-elastik-parketiliim","provider":"CHEMIX","version":"1.0","type":"link"}